• it
  • en

PARTECO - Modular systems for cleanroom

Tel. +39 039485286 (3 linee) - Fax +39 039462350 | info@parteco.it

Walls

The mobile wall system and wall panels designed by Parteco enjoys the following characteristics:

  • Surface coplanarity;
  • Absence of porosity of the materials;
  • Simplicity of cleaning;
  • Flexibility and simplicity of assembly;
  • Easy to dismantle thanks to the special profiles used that allow the panels to be dismantled even individually;
  • Mechanical resistance to shocks;
  • High acoustic sound insulation and thermal insulation;
  • Acoustic sound absorption;
  • Resistance to water and humidity;
  • Resistance to chemical and sanitizing agents;
  • Possibility of drilling with subsequent final siliconing for the passage of cables, installations or for the installation of electrical outlets;
  • Integrability between walls and other elements, such as doors, windows and false ceilings

Pharma PST

The Pharma PST wall system is specifically designed for the construction of pharmaceutical cleanrooms, biotechnology environments, hospitals and other sterile environments such as medical devices and food.
Key features are the coplanarity of the surfaces, the use of non-porous materials that do not allow the growth of bacteria and fungi, the simplicity of cleaning and resistance to decontaminating agents, the flexibility and ease of assembly, the easy disassembly thanks to the profiles special used that allow you to individually remove the panels, the mechanical resistance to shocks.
The Pharma PST wall is made up of modular and independent panels made of different materials according to the customer’s needs and the characteristics of fire resistance, thermal and acoustic insulation.
The panels are connected to each other with a locking structure and sealed with silicone. All fittings (ceiling, masonry and corner) are made of rounded anodized or painted aluminum profiles and designed in such a way as to make laying quick and easy and to eliminate the most difficult to clean points. All materials used and finishes made comply with the GMP recommendations. PST walls can be easily integrated with windows, doors, air recovery systems and systems.

Technical specifications

Standard thickness 45 mm (other thicknesses on request).

Possibility to realize panels in one piece up to a length of 6300mm.

Internal tubular aluminum frame.

Surfaces:

  • HPL plastic laminate, thickness 4mm, fire behavior class B-s1, d0 according to EN 13501-1
  • HPL plastic laminate, thickness 2.5mm, fire behavior class B-s1, d0 according to EN 13501-1

Fills:

  • high density sintered polystyrene foam (40kg / m3), fire behavior class E according to EN 13501-1
  • rock wool panel with oriented and high density fibers (90kg / m3), fire performance class A1 according to EN 13501-1
  • aluminum honeycomb, non-combustible according to DPR407-6 / 10/99

Joints:

  • Internal fittings between the modules made interlocking with internal nodal and sealing with silicone.
  • Ceiling and floor fittings can be made with curved aluminum profiles, guard rail profiles or flat skirting

Integrable accessories

  • Holes for grids and canals and their grilles;
  • Openings for machines;
  • Cable glands and service panels;
  • Holes for electrical boxes;
  • Lead sheet for sound reinforcement;
  • Removable panels using omega profiles;
  • Breakout panel for emergency exit
  • Coplanar glasses made up of a double crystal plate, with an anti-condensation channel tray in anodised aluminum.

Gallery

Clean PTE

The Clean PTE system is a system walls for clean rooms designed specifically for the realization of microelectronic environments, semiconductor production and other highly critical production environments.
Key features are the use of materials without particle emission with excellent electrostatic characteristics, ease of cleaning, ease of assembly, easy disassembly thanks to the special profiles used that allow you to individually remove the panels, the mechanical resistance to shocks.
The Clean PTE wall consists of modular panels and independent made of different materials depending on the needs of the customer and the characteristics of fire resistance, thermal and acoustic insulation. The panels are connected to each other with a locking structure made of aluminum profiles with gaskets. All the fittings (ceiling, masonry and corner) are made of anodised or painted aluminum profiles and designed in such a way as to make the installation easier and quicker and to eliminate the most difficult points to clean. PTE walls can be easily integrated with windows, doors, air recovery systems and systems.

Technical specifications

Standard thickness 45 mm (other thicknesses on request).

Possibility to realize panels in one piece up to a length of 6300mm.

Internal tubular aluminum frame.

Surfaces:

  • HPL laminate, 4 mm or 2.5 mm thick. Class B-s1,d0
  • pre-painted aluminium sheeting, 1 mm thickness. Class A1-s1,d0
  • pre-coated steel sheeting, 0.6 mm or 0.8 mm thickness. Class A2-s1,d0
  • pre-painted steel sheeting, 0.6 mm or 0.8 mm thickness. Class A1-s1,d0
  • polished stainless steel AISI 304 sheeting, 0.6 mm thickness

Fills:

  • high-density sintered polystyrene foam (35kg/m3). Class E-s1,d0
  • fibre-oriented and high-density mineral wool (90kg/m3), Class A1-s1,d0
  • aluminium honeycomb (cell 19), Class A1-s1,d0
  • polyurethane PIR, Class B-s1,d0

Integrable accessories

  • holes for the grilles and channels and relative grids

  • machine openings

  • conduit pipes and service panels

  • holes for electrical boxes

  • lead soundproofing plates

  • removable panels with omega profiles

  • breakout panel for emergency exit

  • coplanar glass consisting of a double crystal plate, with anti-condensate conduit in anodised aluminium.

Gallery

HPL laminate

Serie PST.LAF

The PST series consists of self-supporting modular panels that can be made with different materials depending on the customer’s needs and the characteristics of reaction to fire, thermal insulation and acoustics.

The panels are connected to each other with an interlocking structure and silicone sealing. The connection structure between the modules makes the surfaces perfectly coplanar, easy to clean and look very pleasant. At the same time, the best seal and the simple disassembly of the single panel is guaranteed.

The fittings (ceiling, masonry and corner) are made of anodized or painted aluminum profiles and designed in such a way as to make laying quick and easy and to eliminate the most difficult points to clean.

All materials used and finishes made comply with the GMP recommendations.

PST walls can be easily integrated with windows, doors, air recovery systems and systems.

Technical specifications

Standard thickness 45 mm (other thicknesses on request).

Possibility to realize panels in one piece up to a length of 6300mm.

Internal tubular aluminum frame.

Surfaces:

  • HPL plastic laminate, thickness 4mm, fire behavior class B-s1, d0 according to EN 13501-1
  • HPL plastic laminate, thickness 2.5mm, fire behavior class B-s1, d0 according to EN 13501-1

Fills:

  • high density sintered polystyrene foam (40kg / m3), fire behavior class E according to EN 13501-1
  • rock wool panel with oriented and high density fibers (90kg / m3), fire performance class A1 according to EN 13501-1
  • aluminum honeycomb, non-combustible according to DPR407-6 / 10/99

Joints:

  • Internal fittings between the modules made interlocking with internal nodal and sealing with silicone.
  • Ceiling and floor fittings can be made with curved aluminum profiles, guard rail profiles or flat skirting

 

Integrable accessories

  • Holes for grids and canals and their grilles;
  • Openings for machines;
  • Cable glands and service panels;
  • Holes for electrical boxes;
  • Lead sheet for sound reinforcement;
  • Removable panels using omega profiles;
  • Breakout panel for emergency exit
  • Coplanar glasses made up of a double crystal plate, with an anti-condensation channel tray in anodised aluminum.

Gallery

Metallic coating

Serie PST.ACC

The PST series consists of self-supporting modular panels that can be made with different materials depending on the customer’s needs and the characteristics of reaction to fire, thermal insulation and acoustics.

The panels are connected to each other with an interlocking structure and silicone sealing. The connection structure between the modules makes the surfaces perfectly coplanar, easy to clean and look very pleasant. At the same time, the best seal and the simple disassembly of the single panel is guaranteed.

The fittings (ceiling, masonry and corner) are made of anodized or painted aluminum profiles and designed in such a way as to make laying quick and easy and to eliminate the most difficult points to clean.

All materials used and finishes made comply with the GMP recommendations.

PST walls can be easily integrated with windows, doors, air recovery systems and systems.

Technical specifications

Standard thickness 45 mm (other thicknesses on request) .

Possibility to realize panels in one piece up to a length of 6300mm.

Internal tubular aluminum frame.

Surfaces:

  • pre-painted aluminum sheet sp. 1 mm,
  • plastified or pre-painted steel sheet, thickness 0,6 mm or 0,8 mm,
  • satin stainless steel sheet AISI 304 sp. 0.6 mm or 0.8 mm

Fills:

  • high density sintered polystyrene foam (40kg / m3), fire behavior class E according to EN 13501-1
  • rock wool panel with oriented and high density fibers (90kg / m3), fire performance class A1 according to EN 13501-1
  • aluminum honeycomb, non-combustible according to DPR407-6 / 10/99

Joints:

  • internal fittings between the modules made interlocking with internal nodal and sealing with silicone.
  • ceiling and floor fittings can be made with curved aluminum profiles, guard rail profiles or flat skirting

Integrable accessories

  • Holes for grids and canals and their grilles;
  • Openings for machines;
  • Cable glands and service panels;
  • Holes for electrical boxes;
  • Lead sheet for sound reinforcement;
  • Removable panels using omega profiles;
  • Breakout panel for emergency exit
  • Coplanar glasses made up of a double crystal plate, with an anti-condensation channel tray in anodised aluminum.

Gallery

Stained-glass windows

Serie VC

The VC series is composed of all the glazed solutions that can constitute a stand-alone system or can be integrated with the PST and PTE systems.

In general, the panels are connected to each other with an interlocking structure and silicone sealing rather than with transparent connecting profiles.

The fittings (ceiling, masonry and corner) are made of anodized or painted aluminum profiles and designed in such a way as to make laying quick and easy and to eliminate the most difficult points to clean.

All materials used and finishes made comply with the GMP recommendations.

Technical specifications

The walls of the VC series can be made with a double glazing system sp. 45mm as well as with 10mm single glass.

  • The 45mm system consists of two sheets of transparent safety glass of 3 + 3mm assembled on an aluminum support containing anti-condensation dehydrating salts.
  • The 10mm system consists of a single transparent 5 + 5mm safety glass plate

Joints:

  • internal fittings between the modules made with internal nodal and sealing with silicone or visible profiles in polycarbonate or aluminum.
  • ceiling and floor fittings can be made with curved aluminum profiles, guard rail profiles or flat baseboards.

Gallery