• it
  • en

PARTECO - Modular systems for cleanroom

Tel. +39 039485286 (3 linee) - Fax +39 039462350 | info@parteco.it

Doors

The PARTECO doors, expressly designed for use in clean rooms, are designed to be perfectly integrated into our wall system but, also, to be installed on third-party walls, including drywall or masonry.

All components are selected according to criteria of resistance to an intensive use and of minimization of the friction between components in order to avoid the emission of contaminating particles.

Swinging doors

The series of swing doors consists of single and double doors. The construction foresees a visible frame in tubular aluminum coupled with a panel, blind or glazed, normally realized with the same materials of the walls in which they are inserted. All assembly points or surfaces are sealed with silicone to simplify cleaning operations and, above all, to guarantee a real air tightness.
The doors are made to measure on direct indication of the customer.

Technical specifications

Jamb and batten profiles made of 2 mm thick aluminum profiles.

  • B_PS series: single seal, internal or external hinges.
  • B_PZ series: sealing gasket not designed to further simplify cleaning operations, external hinges.

Surfaces:

  • Double glazing 45mm composed of 2 transparent 3 + 3mm safety sheets.
  • HPL plastic laminate, thickness 4mm, fire behavior class B-s1, d0 according to EN 13501-1
  • pre-painted aluminum sheet sp. 1 mm,
  • plastified or pre-painted steel sheet, thickness 0,6 mm or 0,8 mm,
  • satin stainless steel sheet AISI 304 sp. 0.6 mm or 0.8 mm

Fills:

  • high density sintered polystyrene foam (40kg / m3), fire behavior class E according to EN 13501-1
  • rock wool panel with oriented and high density fibers (90kg / m3), fire performance class A1 according to EN 13501-1
  • aluminum honeycomb, non-combustible according to DPR407-6 / 10/99

 

Gallery

Sliding doors

The series of sliding doors consists of single and double doors that can be installed on a standard track for manual operation or can be equipped with opening and closing motorization. The construction foresees a visible frame in tubular aluminum coupled with a panel, blind or glazed, normally realized with the same materials of the walls in which they are inserted. All assembly points or surfaces are sealed with silicone to simplify cleaning operations. The doors are made to measure on direct indication of the customer.

Technical specifications

Surfaces:

  • Double glazing 45mm composed of 2 transparent 3 + 3mm safety sheets.
  • HPL plastic laminate, thickness 4mm, fire behavior class B-s1, d0 according to EN 13501-1
  • pre-painted aluminum sheet sp. 1 mm
  • plastified or pre-painted steel sheet, thickness 0,6 mm or 0,8 mm
  • satin stainless steel sheet AISI 304 sp. 0.6 mm or 0.8 mm

Fills:

  • high density sintered polystyrene foam (40kg / m3), fire behavior class E according to EN 13501-1
  • rock wool panel with oriented and high density fibers (90kg / m3), fire performance class A1 according to EN 13501-1
  • aluminum honeycomb, non-combustible according to DPR407-6 / 10/99

Gallery

Available accessories

Closure systems
Availability of a wide range of handles and knobs. Parteco always recommends the solution with permanent closing magnets combined with the stainless steel series of knobs or plates. Also available handles with antibacterial treatment.

Floor seal
The guillotine systems are integrated into the door base and make it easier to manage the floor imperfections, also guaranteeing the reduction of air leakage.
The sealing systems used by Parteco are equipped with a double adjustment system to manage both the stroke and the inclination of the gasket.

Closers
Both internal and air systems can be integrated. Parteco uses systems of the main brands available on the market.

Interlocking systems

Parteco doors come out of the factory fully equipped for the realization of any interlocking logic. The optical / acoustic signals are integrated into the door pillars and are made of stainless steel or polycarbonate. The door is controlled by a built-in electric lock or an electromagnet.

Also included in the interlocking package are the control units which, at various levels, can autonomously manage the complete management of the logics or interact with company control systems.

Interlocking systems can integrate management of automatic doors, overflow controls, access control systems or presence detection.

Finally, interlocking systems with pneumatic operation are available for use in ATEX environments.