• it
  • en

PARTECO - Modular systems for cleanroom

Tel. +39 039485286 (3 linee) - Fax +39 039462350 | info@parteco.it

Integrated Ceilings

PARTECO integrated ceilings are modular structures designed for use in cleanrooms that guarantee the maintenance of the pressures, the housing of filters and ceiling lights as well as the characteristics of resistance and flexibility required by the sector regulations.
All ceilings are also CE marked.

Lattice ceilings

Serie CIS

The CIS series consists of modular aluminum false ceilings, or other materials, uwhich can be used in most cleanrooms thanks to their flexibility and ease of installation. It is available in both standard and pedestrian versions.
CIS modular false ceilings consist of a grid system made of aluminum T profiles. The dimensions of the lattice are based on the dimensions of the filters and / or lamps to be used in each specific project in order to allow a simple, economical and robust housing. The infill panels can be made with different materials depending on the customer’s needs and the characteristics of reaction to fire, of thermal and acoustic insulation, of flow rate.
IThe CIS modular false ceilings are suspended by means of a kit for connection to the ceiling of the building or to any independent structure; they are also connected to the walls of the clean room using aluminum perimeter profiles.

Technical specifications

Modularity based on the lamps and filters / diffusers to be integrated. Reference standard measurements 600x600mm, 600x1200mm, 1200x1200mm, 1200x3000mm.

Surfaces:

  • HPL plastic laminate, fire behavior class B-s1, d0 according to EN 13501-1,
  • pre-painted aluminum sheet sp. 1 mm,
  • plastified or pre-painted steel sheet, thickness 0,6 mm or 0,8 mm,
  • satin stainless steel sheet AISI 304 sp. 0.6 mm or 0.8 mm.

Fills:

  • high density sintered polystyrene foam (40kg / m3), fire behavior class E according to EN 13501-1,
  • rock wool panel with oriented and high density fibers (90kg / m3), fire performance class A1 according to EN 13501-1,
  • aluminum honeycomb, non-combustible according to DPR407-6 / 10/99.

Gallery

Clip-in ceilings

Serie CIS-SN

The CIS-SN series is a false ceiling with small modular panels designed specifically for use in clean room with negative pressure compared to the external environment. Thanks to the sturdy curb created during the installation phase, the CIS-SN series combines excellent characteristics of flexibility with those of impermeability.
CIS-SN modular ceilings are made with a concealed structure and filling panels installed with a plug-in system. The panels can be made of different materials depending on the customer’s needs and the characteristics of reaction to fire, thermal and acoustic insulation.
They are suspended using a connection kit to the ceiling of the building or to any independent structure, they are also connected to the walls of the clean room (or white room) through aluminum perimeter profiles.

Technical specifications

Reference standard measurements 600x600mm.

Surfaces:

  • HPL plastic laminate, thickness 4mm, fire behavior class B-s1, d0 according to EN 13501-1
  • pre-painted aluminum sheet sp. 1 mm,
  • plastic or pre-painted steel sheet, thickness 0,6 mm,
  • satin stainless steel sheet AISI 304 sp. 0.6 mm.

Gallery

Ceilings with panels

Serie CST

The CTS series has been specifically designed for the construction of walk-over false ceilings and to be installed above the partition walls of the rooms in order to allow simple changes to the layout of the clean room.
CST modular ceilings are built with a panel system that can be made with different materials depending on the customer’s needs and the characteristics of reaction to fire, thermal insulation and acoustics.
The panels are connected to each other with an interlocking structure and silicone sealing.
The connection structure between the modules makes the surfaces perfectly coplanar, easy to clean and look very pleasant. At the same time, the best seal and the simple disassembly of the single panel is guaranteed.
CTS suspended ceilings are suspended using a ceiling connection kit or any independent structure, they are also connected to the walls of the clean room using aluminum perimeter profiles.

 

Technical specifications

Standard thickness 45 mm (other thicknesses on request) .

Standard standard of reference 1200x3000mm.

Internal tubular aluminum frame.

Surfaces:

  • HPL plastic laminate, fire behavior class B-s1, d0 according to EN 13501-1,
  • pre-painted aluminum sheet sp. 1 mm,
  • plastified or pre-painted steel sheet, thickness 0,6 mm or 0,8 mm,
  • satin stainless steel sheet AISI 304 sp. 0.6 mm or 0.8 mm.

Fills:

  • high density sintered polystyrene foam (40kg / m3), fire behavior class E according to EN 13501-1
  • rock wool panel with oriented and high density fibers (90kg / m3), fire performance class A1 according to EN 13501-1,
  • aluminum honeycomb, non-combustible according to DPR407-6 / 10/99.

Gallery

Walk-on ceilings

Serie Walk-on

Both the CIS and CTS series of suspended ceilings can be made walkable. When the solutions used are varied, it is possible to obtain load capacities ranging from 120 to over 200 kg / m2.

The minimum thickness of the panels in these cases is 20mm for aluminum honeycomb and 45mm in other cases.

Gallery